Olly
Member
- 127
- 6
- 18
- Location
- Bristol/CT
Does anybody happen to know what size tires were on the P-4 Crash Trucks?Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Oshkosh P-4 Crash Truck Question
- Thread starter Olly
- Start date
- 7,366
- 19,070
- 113
- Location
- Charlotte NC
.
I believe they are 24R21, 16-Ply tires
Olly
Member
- 127
- 6
- 18
- Location
- Bristol/CT
Thanks for the information.
The P15,A32P23 and T1 AARF are the only one to use 24R21s
The A32 P19 use a 445/80R25 radial high-speed backhoe HMEE uses the same tire.
P4/M1500s use a 18x22.5 16 ply
Post a picture of what truck you are talking about. Below is from the p4 manual.
The A32 P19 use a 445/80R25 radial high-speed backhoe HMEE uses the same tire.
P4/M1500s use a 18x22.5 16 ply
Post a picture of what truck you are talking about. Below is from the p4 manual.
Attachments
Olly
Member
- 127
- 6
- 18
- Location
- Bristol/CT
Thanks for the extra information.... the truck that I was specifically looking for the p4/m1500 trucks. Been looking at the axles with the 5.81 gear ratio and air lockers.... I've switched my transfercase so now my final gear ratio is 1:1 if I go with an automatic.... just trying to get the truck to be able to run on the highway at least in the slow lane anyway.