Outside door handles bolts

[rtadams89]

I changed out my broken exterior door handles and had to drill out the bolts that were holding the handles on. I'll need new bolts and want to run a tap through the holes first, but since I have neither the original bolts nor a clean threaded hole to check, I have no idea what size the bolts are. So, what size and thread pitch are the bolts that hole the outside door handles on?

 

[rtadams89]

Specifically, I am looking for part 8743908 as shown on page #312 of TM9-2320-361-20P. I think it is a 3/4 length, oval countersunk, 10-24 bolt, but would like confirmation.

 

[63C20]

The door handle screws are 10-32 x 3/4" oval Phillips head

 

[rtadams89]

Ahh, 32TPI. Thanks!

 

[doghead]

I simply googled the number you posted and "screw".

http://www.parttarget.com/5305-00-4...39.html/-15061C7A-E510-438D-8777-3729E8A3CDC7