Proper Air Pack Lube

[Heavysteven]

I want to go on the record and say I think the proper way to lube the airpack is to
1. Remove the cover plate
2. Remove the incoming air line
3. Squart Tool Oil in the incoing valve
4. Reinstall the cover plate
5. Remove the discharge
6. Cycle the brake pedal

Putting air tool oil in the cylinder only does not lubricate the incoming valve

Just my 2 cents

 

[emr]

U are sure on track it seems to me, But for me I do not know the insides well enough to discount this, but I will say that there has never been a rash of failures of these units and it is possible most never even get lubed , and the port for the lube seems to be as sufficient as needed, but go for it i always say,