- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Hi All,
Need the dimensions for the 5-ton control box, "A" and "B" in image attached.
TIA
Need the dimensions for the 5-ton control box, "A" and "B" in image attached.
TIA
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Protective Control Box mounting dims
- Thread starter cranetruck
- Start date
4052
New member
- 19
- 0
- 1
- Location
- Hazel Green, AL
A=6" B=5 5/16" These "B" holes are slotted on the control box to give just a little left to right adjustment.
- 5,251
- 3,961
- 113
- Location
- Charleston, WV
Thanks 4052!
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Much appreciated! I'm restoring a box for Chris and he couldn't get to his truck and the ""ears" on my box were cut. 
Turns out to be the same as the hole spacing for the 25 Amp regulator box...
Turns out to be the same as the hole spacing for the 25 Amp regulator box...
Last edited: