Well, I rebuilt my fuel pump using a NOS kit then couldn't get my truck to start so I replaced the kit membrane and diaphram with new ones ( thanks to John at Midwest Military) but still couldn't get her running. After admitting to myself that I KILLED MY TRUCK 
I installed a new pump from NAPA and the truck started but idled poorly until I realized that since the new pump had no vacuum assist I had a vacumm leak. Once the open line was plugged the truck idled pretty good!
Thanks to everyone who responded to my previous post for their help.
Now to replace the master cylinder hope the brakes will bleed then replace gearbox, transfer case and differntial fluids...
I installed a new pump from NAPA and the truck started but idled poorly until I realized that since the new pump had no vacuum assist I had a vacumm leak. Once the open line was plugged the truck idled pretty good!Thanks to everyone who responded to my previous post for their help.
Now to replace the master cylinder hope the brakes will bleed then replace gearbox, transfer case and differntial fluids...