• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Red Ball Rally/Gilbert PA MV show Sep 26/27 2025

joshs1ofakindxj

Active member
737
119
43
Location
SW PA
I will be there Friday.

I could be persuaded to take home a good M151 differential if the price is right.

The only thing I really want to find for my jeep is a canvas cover for the RT-524 that doesn't cost as much as an engine.

I also want a USMC M416 trailer OR a similar size military flat bed trailer but I don't expect to find one of those there.

Anyone looking for a Teletype system? I have a AN/UGC-74, AM3349/GRC-106, and a RT834/GRC-106. Like 150 lbs of comm equipment I would like to sell.

I should have a freshly rebuilt M151 25 amp generator and old style voltage regulator available for sale. The alt/gen rebuild shop should be done testing those this week.
 

emmado22

Moderator
Super Moderator
Steel Soldiers Supporter
7,071
168
63
Location
Mid Hudson Valley NY
I will have fresh 1 gallon cans of CARC 383 Green for sale. and be making custom oil board stencils cut on site, any size that fits on a 7x24 piece of oilboard.
 
Last edited:

DB556

Active member
201
129
43
Location
Ambridge, Pa
I might be putting a deuce radiator, fuel tank/pump, air pack and master, bunch of gauges, canvas bed cover, deuce alternator, 24v windsheild wiper motors, etc Looking for a roller fairlead for a 5ton for my deuce.
 

ZiggyO

Well-known member
Steel Soldiers Supporter
653
516
93
Location
Nebraska
It looks like I will be making the trip this year. I plan to bring a ton of stuff-- some of the highlights are:

- Towing lightbar and NOS towing light cable
- Additional NOS towing lightbar cables.
- Complete 4 man VIC-1 intercom with cables, headsets, etc. Fully tested and confirmed working
- Additional am-1780 vic-1 intercom amplifiers, fully tested and confirmed working
- generator transfer switch assembly
- ibis tek remote control light heads
- NOS antenna mast air compressors (essentially a 120v continuous duty high end air compressor)
- surgical field sink
- M151 clutch kit NOS
- NOS mt-1029 radio mounts
- M151 radio mount sponson plates (both for the rt-524 and r-442)
- Possibly a real nice m151 fuel tank
- 1/2 ton wc fuel tank
- M151 canvas doors and side curtains (od canvas, not vinyl-- also the plastic windows are clear)
 

CUCVFAN

Gunner's Mate First Class
Steel Soldiers Supporter
1,178
48
48
Location
Jarrettsville, MD
I'll be heading up Thursday. I'll have some new/NOS and also some used parts for sale. Hoping the weather holds out!

I will have the following NOS parts:
  • M939 Battery relocation kit (tan) - $750 - See this thread for info on what is included in these kits - https://www.steelsoldiers.com/threads/battery-relocation.98321/
  • M35A2 Arctic Fuel Burning Heater kit - $750
  • M925/M932/M928 hydraulic front winch control valve - $150
  • S-250 Shelter lifting/tie-down sling assembly - $150
  • M939 Fuel fill tank strainer - $35
  • M101/M105 metal bow set - $225
I will have the following used parts:
  • CUCV M1008/M1008A1 rear bow assembly (2 sets available) - $75/set
  • CUCV M1008/M1008A1 cargo cover side rails (I think I have 2 full sets, but I need to double check) - $50/set
  • M105 3-color vinyl cover. Couple of small holes - $75
A few things I am looking for:
  • A pair of wrecker boom jacks (that are NOT rusted together)
  • 1 - Nice 12.00-20 Michelin XZL
 
  • Like
Reactions: art

maddawg308

Well-known member
Steel Soldiers Supporter
10,885
821
113
Location
Appomattox, VA
I will be there from Thursday evening thru Sunday morning, I always look forward to this event! My normal location - against the east fenceline. Just a bunch of odds and ends surplus, a few radio parts, etc. Lots of stuff for the $1 tarp.

Items I am looking for:

MV stuff:
CUCV front battery tray and brackets
CUCV bumper shackle (1) and pin
CUCV antenna brushguard
spare tire mounting hardware for M1009
pair of M16A1 or M16A2 "rubber ducks" for rifle rack

radio stuff:
RT-654/TRC-77 radio set (NOT a PRC-77)
C-974 selector control
C-973 remote control
CU-286 coupler
AM-6874/PRC-104 amplifier/coupler
PRC-104 accessories

general surplus:
black Scepter 5-gallon water can
gallon of CARC desert tan paint
case of CARC 383 green spray paint
Desert Storm 6-color desert BDU pants, size Large-Regular

All I can think of I need right now. Hope to see everyone there!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks