Gary the dog
New member
- 7
- 5
- 3
- Location
- Pennsylvania NE
Does anyone have recommendations about reliable Humvee 6.5 non turbo injection pump rebuild services in the Pennsylvania area?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Reliable injection pump rebuild services
- Thread starter Gary the dog
- Start date
- 7,397
- 10,381
- 113
- Location
- Papalote, TX
Welcome to the SS forums!
Do not limit yourself to the PA area, a good shop is worth the shipping fees, there are allot of shops but many have bad reputations.
Do not limit yourself to the PA area, a good shop is worth the shipping fees, there are allot of shops but many have bad reputations.
Gary the dog
New member
- 7
- 5
- 3
- Location
- Pennsylvania NE
Who is a reliable vendor ?
- 7,397
- 10,381
- 113
- Location
- Papalote, TX
According to RWH who likely changes more IPs than anyone else said he would only go to HPG or MAC motors for ether a rebuilt or new IP.
These are not the cheapest options but the labor to change the IP 2 or 3 times until it is right is massive, do it once and be done with it.
These are not the cheapest options but the labor to change the IP 2 or 3 times until it is right is massive, do it once and be done with it.
Gary the dog
New member
- 7
- 5
- 3
- Location
- Pennsylvania NE
Thanks!
- 96
- 191
- 33
- Location
- Rochester NY
They a good candidate for an M35 LTD ( non turbo ) IP rebuild?
- 3,798
- 3,902
- 113
- Location
- Brooklyn, NY
Just purchase new.
I went through this and ultimately decided on a new unit. I am much happier with my decision because I never need to look back and say “what if”. The price of rebuilt is not attractive enough to make any other decision in my mind. Replacing an injection pump in these vehicles that do not have a fuel rail is a real PIA.
I went through this and ultimately decided on a new unit. I am much happier with my decision because I never need to look back and say “what if”. The price of rebuilt is not attractive enough to make any other decision in my mind. Replacing an injection pump in these vehicles that do not have a fuel rail is a real PIA.
Last edited: