Repair of AMMPS 10x0 A1 Control Unit after Waterdamage - a suggestion for AMMPS Owner's

[peapvp]

So, we got a AMMPS 10x0 Control Unit, which had suffered water damage. The cause of this is as follows:

All 24 Screws, which hold the 6 Amphenol Receptacles in place, have small O-Rings on them.

THOSE O-RINGS HAVE TO BE REPLACED EVERY TIME THE SCREW IS TAKEN OUT!



REUSING THEM WILL LEAD TO A DISFORMING OF SAME AND WATER (Condensation) WILL ENTER ENCLOSURE:



Well, we got her fixed up:



We are here to help if needed

 

[peapvp]

I thought I make a video to explain the phenomenon of corrosion inside a “sealed enclosure “