Replacement of the high beam indicator

[Tuttdog]

Hey All,
i have a 1993 998 with a non functioning high beam indicator light. I have a replacement led one and for the life of me I cannot get the old one loose. I removed the four bolts to access the back of the panel and then removed the two screws holding it in from the back side. I have applied more pressure than I’m comfortable with from the front and it will not budge. Is it glued in place or am I missing something else?

thanks
jason

 

[Tuttdog]

So I figured it out, You have to remove all the gauges to remove the white backing plate which allows the indicator light to fall out. Lessen learned