• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Reprograming CTIS

Strobi1

New member
21
4
3
Location
Chesapeake
I have a 1996 BAE M1078 with a newer reprograming CTIS ECU. I do not have the standard din 9 plug on the dash since the truck is older. I think I would have to plug straight into the ECU to reprogram tire pressure settings? Has anyone run into the same issues? If so, how have you over come it? Thanks!

Sent from my ZTE A2017U using Tapatalk
 

pontiac62

Member
180
4
18
Location
battle creek, mi
I have a 1996 BAE M1078 with a newer reprograming CTIS ECU. I do not have the standard din 9 plug on the dash since the truck is older. I think I would have to plug straight into the ECU to reprogram tire pressure settings? Has anyone run into the same issues? If so, how have you over come it? Thanks!

Sent from my ZTE A2017U using Tapatalk

IMG_2082.jpg

This is from Sean fillner channel on you tube. This the one he put in for getting higher highway pressure. Believe he mentioned it was an mrap ctis . Not sure if this helps, but one way. Disclaimer I’m not a ctis guru.


Sent from my iPhone using Tapatalk
Man of few words

M1081 LVAD
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks