bigmech
Member
- 166
- 0
- 16
- Location
- Potterville Mi 48813
I'm going to do a shorty M35. My wife is on to me about this and is asking me to finish my M715 first. She's right in what she knows , but like the old saying, what she dosn't know won't hurt her. So with that said I'm trying to get the peices ready for the M35 shorty. My question is what is the bolt pattern and what size and off-set do I need to run like say 1400's tires. Or should I consider a smaller size . I want to step up the pump pressure, and am hoping this would run the larger tires down the road . ( looking for a higher top speed). On the M715 I went to a big block with a turbo 400 with 38's hoping the torqe would over come the tire size instead of a weaker 7004r trans with a small block to handle the lower geared axles. Its different with the M35. Kind of harder to stuff a higer horse power engine into one of these when its your first attemp with something this big.So I know I talk to much but what bolt pattern and what size and offset should I tell stockton wheel or USA6x6 to build?