lonewolf90
New member
- 97
- 0
- 0
- Location
- Michigan
I was wondering if I should install a heater block. I live in Michigan and was thinking it would help in the winter time.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
should I install a heater block
- Thread starter lonewolf90
- Start date
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
You mean "block heater"? Yes, it would definitely help.
lonewolf90
New member
- 97
- 0
- 0
- Location
- Michigan
Yes a block heater lol can't believe I did that lol
scottladdy
Member
- 538
- 8
- 18
- Location
- CT
Most advise using a block heater in temperatures about 20 degrees F or lower. Cost/benefit at temps above that are usually not there.
You want a minimum of about 2 hours of run time. Most hook up a timer that will start the unit about 2 hours (or more if really cold) in advance of starting the engine.
I've been able to confirm that the crossover pipe will reach about 40 F + in zero degree F weather with a 600 watt frost plug heater.
I hope this helps ...
You want a minimum of about 2 hours of run time. Most hook up a timer that will start the unit about 2 hours (or more if really cold) in advance of starting the engine.
I've been able to confirm that the crossover pipe will reach about 40 F + in zero degree F weather with a 600 watt frost plug heater.
I hope this helps ...
wayne pick
New member
- 658
- 2
- 0
- Location
- Valley Cottage NY
A must have in the northern states. I have a 600w heater timed from 4 hrs prior to startup. If you have a long run from your truck to a power source, use a 12ga extension cord and an appliance duty timer. Way faster warmups and less wear and tear is a good thing.