BFR
Rocket Surgeon
- 2,330
- 42
- 48
- Location
- North Georgia
What size socket will I need for...
lugnuts?
spindle nut?
spark plugs ?
lugnuts?
spindle nut?
spark plugs ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
socket sizes?
- Thread starter BFR
- Start date
fredrader
New member
- 338
- 0
- 0
- Location
- Miamisburg,Ohio
The lug nuts are 1 1/2" and the square stud is 13/16" ..The plugs etc I don't know..
Desert Rat
New member
- 2,314
- 5
- 0
BFR,
Wonderfully dry sense of humor!!!!
Wonderfully dry sense of humor!!!!
FSBruva
New member
- 629
- 1
- 0
- Location
- Marietta, GA
Psssst.... DR.... (he's got a gasser!)
- 34,010
- 1,823
- 113
- Location
- GA Mountains
The spindle nut socket is 3" and it's an 8 sided nut. Besides the socket for your plugs, start shopping Ebay for a plug wire wrench. They are invaluable when you need one. I forget the plug size but a standard thin wall socket is the best construction. Impact sockets aren't broached deep enough for the socket to go over the plug (typically).
red devils dude
New member
- 1,958
- 3
- 0
- Location
- Ft Campbell
for the lug nuts get a Napa nhp 660 tool does both the hex nut and the square 13/16.
Desert Rat
New member
- 2,314
- 5
- 0
FSB,
Ok, I'm a little tired.....................
Ok, I'm a little tired.....................
- 2,479
- 26
- 38
- Location
- Houston Texas
DR you know it's going to be a while before you live that one down!
Desert Rat
New member
- 2,314
- 5
- 0
Ken, with friends like you who needs enemas?
Crazyguyla
Active member
- 817
- 124
- 43
- Location
- Altus, OK
socket for the spark plugs ia 7/8" I tthink the plug wires is 3/4" What's wrtong with a gasser?? 
- 34,010
- 1,823
- 113
- Location
- GA Mountains
Nuthin wrong with the gassers. They use a little more fuel and accelerate a little slower but you can sneak up of folks with them for sure.