Spicer 3053a question

[Kamikaze12volts]

What is this part name and what exactly that part is for and if needed to be plugged to something or not.

The part is the one under the flange of the rear output.

Thanks a lot.

 

[gimpyrobb]

Nice avatar! A 725 was my first MV. I don't know what it is called, but I might have a spare, need one?

 

[Kamikaze12volts]

i'm just asking if something need to be plugged like tranny remote oil cooler. I have only the tranny and just want to be sure BEFORE fitting everything under.

But thanks .....

 

[gimpyrobb]

So would a pic of a stock one help?

 

[Kamikaze12volts]

So would a pic of a stock one help?

It should be stock but if you have a picture ... send it so we can compare both.

 

[gimpyrobb]

I don't know what to say. The 3 I have sitting out of trucks, have a plastic cap in there. The one in my truck has nothing. I'm waiting for the pics to download.

 

[gimpyrobb]

Pics don't really tell us anything. The first one is in my deuce and the second is one that has a busted main shaft. It came out of the truck with a red plastic cap in there.

 

[DieselBob]

Mine seems to have some type of sealant in it. The TM 9-2520-246-34-1 manual shows a "lever" attached there. I am thinking that on some versions there is a stud installed there that is used as a pivot point for some type of control linkage. Maybe for a truck like the auger/post hole drill.

 

[gimpyrobb]

Would it tell us anything if I took one off to look at?

 

[gimpyrobb]

It does not extend into the trans. It is just a tapped section of metal.

 

[gringeltaube]

Are we still guessing what that blind hole is for...?

What about a 1/2"-13 threaded stud as pivot for the lever which is part of the shift linkage between transmission and the T-136-21 Sprag TC? Knowingly that linkage is obsolete if the T-136-27 Air shift TC is used...

G.

 

[Kamikaze12volts]

Are we still guessing what that blind hole is for...?

What about a 1/2"-13 threaded stud as pivot for the lever which is part of the shift linkage between transmission and the T-136-21 Sprag TC? Knowingly that linkage is obsolete if the T-136-27 Air shift TC is used...

G.

Thanks ... Now i know what this part use for.