• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Spicer 6352 transmission help

162tcat

Active member
710
48
28
Location
Washington
I have some questions about the spicer 6352 trans (non OD) in my M54A2. It grinds almost every gear and the fluid that was drained from the unit was full of brass shavings and black. Is it worth rebuilding? If so, does anyone know of a good source for parts? On a side note, if you know of a good take out unit in or near Washington state, PM me.

Thanks in advance
 

NDT

Well-known member
Steel Soldiers Supporter
10,767
7,276
113
Location
Camp Wood/LC, TX
All your synchronizers are shot. A different take out trans may be cheapest. Call around to Memphis Equip and Sam Winer Motors.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
327
0
Location
gainesville, ga.
White Owl had ALL the parts that we needed to rebuild the trans in Swiss's restored restored 1955 m62
 
Top