• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

T-600 Oil Pump Suction Locations and Max Clocking

L

letssled

Member
52
0
6
Location
Canada
I need to clock a T-600 Transfer Case for my truck I am building and have run into a snag:

  • Oil Pump: I need to clock my case at at least 45 degrees (preferred would be 60 degrees) but I am unsure where the suction lines are in the case. I removed the pump and it looks like it has dual suctions. If so are they front/rear or driver side/passenger side?
  • Has anyone else ever clocked these? If so did you have any problems? My shafts will be run at fairly high speeds 2000rpm to 2100rpm for hours at a time.
  • Does someone has any pictures that would show this?

Thanks Very Much!
 
You must log in or register to reply here.
108,819members
163,986threads
2,307,312posts
366online users
Top