• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Temp gauge trouble

fredrader

New member
338
0
0
Location
Miamisburg,Ohio
I need a new temp and oil gauge for the deuce..I checked Satern but they didn't show a temp gauge..Any Ideas??
My oil pressure gauge still works but it reads 30 and if I tap it it goes up higher and stays there a while and comes back down..My temp gauge worked great untill I was on my wat back from picking up my 2nd trailer and it went from 180 to just past 240 and stayed there..I got home and shut the truck off for a couple hours and startet it back up..It seemed to be working ok and all of a sudden it went past 240 again..It had only been running about 10 min so I know the engine was still cold..
 

mangus580

New member
6,010
282
0
Location
Western NY
Fred, try wiggling the connections for the temp gauge... Usually gauges will peg, if they dont have a good connection to their sender.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks