southdave
Active member
- 1,986
- 6
- 38
- Location
- ripley, oh/TDY Lordstown,Oh
Chrismas eve I decided to go to SW Bradley's House to pick up some 6.2 motors he was holding on for me.. It was about 100 mile one way trip for, it was first real trip I did in this truck except for .5 trip to the store.
here what I done so far to it
1. electric fuel pump
2. NV4500 swap.. need to swap out master cly. for one that goes with sm465
3. gauges, oil temp.
4. 12v conversion
5. raditator , belts and hoses ect.. Gp push button
besides oil line failure, lucky I brought a length of hose and some clamps.. Note check the O rings on the oil cooler line
truck ran great @ 75mph bruned about 12 gal of fuel on the trip but had 2300lb in the bed for half the trip..
on another note the locker and 4:56 have to go..
here what I done so far to it
1. electric fuel pump
2. NV4500 swap.. need to swap out master cly. for one that goes with sm465
3. gauges, oil temp.
4. 12v conversion
5. raditator , belts and hoses ect.. Gp push button
besides oil line failure, lucky I brought a length of hose and some clamps.. Note check the O rings on the oil cooler line
truck ran great @ 75mph bruned about 12 gal of fuel on the trip but had 2300lb in the bed for half the trip..
on another note the locker and 4:56 have to go..
Last edited: