• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

transmission removal

exoilfld

Member
51
0
6
Location
alto, tx
When I remove the 400 trans; the tech manual picture shows a splined shaft out the rear. My question is; will what the splined shaft fits into in the transfer case remain in position so the trans can fit back into it easily or will it drop or change position?
 

exoilfld

Member
51
0
6
Location
alto, tx
There seems to be 2 sets of bolts. 4 on one side and 6 on the other. Does the trans mount come off with the trans? The manual does not seem to be very clear.
 

NDT

Well-known member
Steel Soldiers Supporter
10,107
5,714
113
Location
Camp Wood/LC, TX
Either. The trans/transfer assy will be on the ground, if you are rebuilding the trans, the rebuilder will appreciate if you have the adapter off already.
 

exoilfld

Member
51
0
6
Location
alto, tx
I guess I am confused. I thought I could separate the trans from the transfer case leaving the transfer case supported but still in the truck. Is this not right?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks