EnfieldFan
New member
- 12
- 0
- 0
- Location
- Ogden,Utah
Is there any major difference between the m1008 and the m1028.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Truck Difference
- Thread starter EnfieldFan
- Start date
jatonka
Well-known member
- 1,801
- 57
- 48
- Location
- Ephratah, New York
Rear helper springs and front locker on M1028. GVW 9400 pounds on M1028
ODdave
New member
- 3,213
- 38
- 0
- Location
- lansing michigan
i noticed my 1028 had extra braces in the frame below the firewall that i have never found on a 1008
AJMBLAZER
New member
- 2,688
- 8
- 0
- Location
- Paducah, KY
The rear helpers, LIMITED SLIP in the front axle, and depending on the 1028Ax variant may or may not have a NP205 instead of a NP208.
Wolf.Dose
Active member
- 1,062
- 9
- 38
- Location
- Boehl-Iggelheim, Germany
Look at your VIN. The G is rated for a 9000 lbs GVW brake, the H for a 10000 lbs GVW brake. It is the 4th didget of the VIN. This info can be asked at any Chevy or GM dealer if they are willing to help and have the required competence.
By the way, the rear brake is identical, even the automatic load sensing valve is the same. The difference in brake performance is due to the different spring rating of the rear axle and the related adjustment.
Wolf
By the way, the rear brake is identical, even the automatic load sensing valve is the same. The difference in brake performance is due to the different spring rating of the rear axle and the related adjustment.
Wolf