Truck won't start!

[Parker2]

I have my Duce on a jobsite and was using it yesterday and it ran great all day. I shut it off for about 10 or 15 minutes and it would not restart.
I thought maybe the filters were dirty so I replaced them today. No difference.
Like I said it ran great at 160 degrees all day untill I shut it off.
Any ideas?

 

[gimpyrobb]

The shut-off cable you pull out to stop the truck, sometimes stays out(in the motor compartment) when you push it back in at the dash. Have you checked this?

 

[cranetruck]

To complete gimpy's suggestion, remove fuel cut-off assembly cover on the IP and make sure that the mechanism moves freely. It is spring loaded and must return to starting position when the shut-off handle is pushed in.

 

[Parker2]

Thanks guys I'll check it out this morning.

 

[Parker2]

Well I checked out the shut off mechanism and it seems to move freely. I have fuel in the head and also checked to see if the piston is moving up and down (it is).
Any other ideas?

 

[actionpaintball]

Start with the basics-you need air, fuel, timing and detonation (compression/spark).