• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ugly. Rebuilding Carter / BB ETW1 carburetor with stuck pump plunger piston

qualityhardware

New member
23
0
0
Location
North Carolina
Rebuilding my ETW1 carburetor in the dis-assembly phase, and the pump plunger piston is just plain stuck in the upper housing of the carburetor.

I am at a loss for getting it out. Tried putting the whole assembly in the oven for a while and then using ice on the piston shaft to cool it to see if heat/cold would help. Nothing. Been soaking it in Kroil overnight. Nothing.

Anybody got any ideas? I am at a complete loss.:roll:

Pic.

ETW1-piston-pump.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks