Found a feew cut vacuum hoses on my 1165 with a 6.5 turbo and not sure what they are for. They are cut on both ends and look like they were connected to something that was removed, does anyone know if they need to be connected to anything
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Vacuum hose
- Thread starter jim1131
- Start date
- 10,184
- 5,913
- 113
- Location
- Camp Wood/LC, TX
Looks like fording hoses. What's with the Kermit the frog green?
Action
Well-known member
- 3,581
- 1,552
- 113
- Location
- East Tennessee
No vacuum hoses on hmmwv, except for the air restriction gauge.
if you are talking about a thick rubber hose, one runs from cdr valve to water pressure cup. Both of those are likely missing.
When you find thin hard plastic lines cut, they should not be left open. Those are vent lines and would eventually let contaminants into components.
Can you post a pic of the entire truck?
Did you remove the a/c to paint interior? The duct is not on dash.
if you are talking about a thick rubber hose, one runs from cdr valve to water pressure cup. Both of those are likely missing.
When you find thin hard plastic lines cut, they should not be left open. Those are vent lines and would eventually let contaminants into components.
Can you post a pic of the entire truck?
Did you remove the a/c to paint interior? The duct is not on dash.
Yes I did remove the duct to paint the interior. Also sprayed sound deadening, installed duramat and carpeting. I will post pics of the entire truck later today but its not finished yet
Attachments
- 7,416
- 19,161
- 113
- Location
- Charlotte NC
.
Well, the good news is that your truck won't get lost in the parking lot.
I guess that is part of the magic of fixing old MV's.
You make it your own and paint it how you like it...
Well, the good news is that your truck won't get lost in the parking lot.
I guess that is part of the magic of fixing old MV's.
You make it your own and paint it how you like it...