• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

weak brakes

2deuce

Well-known member
1,448
111
63
Location
portland, oregon
I was intending to drive the truck home but...
It has about 1" of pedal before it hits the floor and doesn't change with pumping. I checked the master cylinder and it was full. Air pressure was good. Do you think air in the lines is the problem or something more serious? The truck has been sitting for many months. I'm not near this truck so I want to be prepared next time I'm there. Thanks
 

acetomatoco

New member
2,198
7
0
The brakes need to be adjusted...only 25 adjustments, plus two more on the Ebrake.... If you are not near the truck you should be studying the manuals each and every waking moment...until you are...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks