• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

well the beast got her first bit of battle damage yesterday

maritimer

New member
404
3
0
Location
Yarmouth, NS
well was out at a buddys and was pulling some support anchors out of the ground with the beast and out of nowhere this giant maple tree attack the truck. during the battle the maple ripped off the passenger side antenna mount. seems the nuts on the inside of the body panel were pulled through while the mount it self stayed intact and inshape as the maple just thew it aside on the ground i now have to figure out how to get it back on the truck without it looking like hell LOL. any thoughts
 

aboonski

Member
722
8
18
Location
West Melbourne Florida
RE: well the beast got her first bit of battle damage yester

If you can somehow get behind the panel and use large washers and nuts it would be and easy fix. One way to "cheat" is to use pieces of coathanger which you would tack weld to each nut and washer, then feed it into the access hole and screw the same bolts back in place.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks