what is oil pressure for mep831a

[rick86612]

simple one what is running pressure for my mep831a gen set. i am now looking for another pressure switch if some on has number for that i want to install a gage to make sure it is right also part number for oil filter please
thanks rick

 

[Guyfang]

The TM 9-6115-639-13&P should hold all the info you need.

 

[kloppk]

I did put a gauge on one of my 831's. As I recall when initially started it was about 125 PSI. And is warmed up it dropped to about 80-90 PSI.

 

[vrzff]

I've used this one a few times. It does the trick, and the price is right. I *believe* the factory switch is NC, and opens at 20psi (someone may have to correct me). This switch is NC/NO (3 terminal) 15psi. 5psi in this case, to me, is negligible.

Pardon Our Interruption...