yellobronc
New member
- 665
- 3
- 0
Bought these from GL, I think they will work for my Duece but not sure. Any help will be appreciated
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Will These fit my 70 Deuce?
- Thread starter yellobronc
- Start date
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
RE: Will These fit my 70 Duece?
The starter looks like the 2920-226-6545, which is one of the models used on the multifuel engine and the 60 amp alternator is correct also.....
The starter looks like the 2920-226-6545, which is one of the models used on the multifuel engine and the 60 amp alternator is correct also.....
- 26,247
- 1,168
- 113
- Location
- NY
RE: Will These fit my 70 Duece?
It looks like the "nose" is indexed to fit a 5 ton Multi-Fuel. It can be reconfigured easily. Look at the direction of rotation on the motor, the deuce starter turns clockwise as you face the drive end. The drive gear should have 12 teeth. Spares are nice to have! Take a look at TM 9-2920-248-35(Prestolite) or TM 9-2920-243-34(Leece Neville) for more info.
It looks like the "nose" is indexed to fit a 5 ton Multi-Fuel. It can be reconfigured easily. Look at the direction of rotation on the motor, the deuce starter turns clockwise as you face the drive end. The drive gear should have 12 teeth. Spares are nice to have! Take a look at TM 9-2920-248-35(Prestolite) or TM 9-2920-243-34(Leece Neville) for more info.
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
RE: Will These fit my 70 Duece?
The TM 9-2920-242-35 has the starter mentioned above listed on its cover, available from milman61 (ebay).
The TM 9-2920-242-35 has the starter mentioned above listed on its cover, available from milman61 (ebay).
yellobronc
New member
- 665
- 3
- 0
Thanks, I will check the starter rotation. I bought these because I had a chance they would work and people to give/sell if they dont.
Yep, spares are nice. Do you think the duece will notice the added weight of the parts.
Yep, spares are nice. Do you think the duece will notice the added weight of the parts.
yellobronc
New member
- 665
- 3
- 0
As I face the end of the starter with the gear, the arrow on the nameplate is pointed clockwise. There is 12 teeth. Does this mean it is built for a Duece?