wiccantoy
New member
- 281
- 0
- 0
- Location
- North wales , pa/ Williamstown nj
Ok have a new wiper motor on my 85 m1009 and have no high speed. Anyone have a idea as to why??
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
wiper issues
- Thread starter wiccantoy
- Start date
K9Vic
Active member
- 1,261
- 7
- 38
- Location
- Fort Worth, TX
It could be a bad switch, you can always run 12v to the lead in the motor to see if it works, that will tell you better where the problem is. As for what wire, look at the TM and it should tell you how to diagnosis it.
If you have a bad switch, that is a project to change and you need special tools. There are plenty of post here on changing the key cylinder which you remove will be in the same area to change the switch. Also videos on Youtube how to do this.
If you have a bad switch, that is a project to change and you need special tools. There are plenty of post here on changing the key cylinder which you remove will be in the same area to change the switch. Also videos on Youtube how to do this.