• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

WRECKER TOWING

one of the manuals i have tells to just put the transfer case in neutral when lift towing. anyone know if the t case will be damaged this way? i was thinking the drive shaft between #2 axle and the t case should be pulled. any suggestions? comments? opinion's?
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,814
113
Location
GA Mountains
After a hundred miles or so, bad things happen. I'd pull the shaft. Matt has toasted more than one deuce TC being lazy.
 

timntrucks

Well-known member
Steel Soldiers Supporter
4,037
113
63
Location
Ponchatoula LA
the truck i just towed had its shaft removed. is it the fact that the transfer would be on a angle that would mess it up. like to get the whole story on that for future adventures Tim
 
Top