BillIdaho
Member
- 417
- 7
- 18
- Location
- Caldwell, Idaho
I am in DIRE NEED of a Gama Goat radio mounting plate! It is aluminum, about 18 inches wide (measurements from memory), about 3 inches tall, and about 20 inches deep. The front is at a 45 degreee angle, with an overhang, if that makes any sense. There will be a bolt hole pattern to fit a MT1029 mount on the top plate. It has three "runners" which are also aluminum formed into a channel. Those raise it up about 3 inches off the carrier
I searched the Lodi Show, but alas, to no avail.
Help!
I searched the Lodi Show, but alas, to no avail.
Help!