-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Latest activity
What's new
BMI
SECO
Midwest Military Equipment
Eastern Surplus & Equipment Co
-
THi I have a problem with my transmission low range. I can only put it in low range when the engine is off. Then when I start it I put...
-
Rrobert248 replied to the thread MEP-802A questions.What is your opinion on changing out the gasket by making your own with this stuff...
-
2240hippie replied to the thread No AC output.I did remove it to test it. It tests fine.
-
RMake sure you get every last speck of sand out of the thermostat housing and the water passages. Also might want to change the gasket...
-
mrandig replied to the thread Fixing the 1998 HMMWV.If I was going to make a post on how to remove the radiator in a M1123, I missed my opportunity. Once I got rolling, any chance of... -
-
KKevin Means replied to the thread M939 CTIS Controller for my FMTV?.An update... Found a used CTIS controller on ebay for $288.00 and bought it. It was a direct replacement for that OEM unit that had...
-
2240hippie replied to the thread No AC output.I am sorry if I did not send this prior. Alot of suggestions.
-
RRay70 replied to the thread No AC output.Take the fuse out of the holder and test it. it is a slow blow fuse, but there is no such thing as a time delay reset fuse. Remove it...
-
2240hippie replied to the thread No AC output.I fed 24V to X and Y on K1 terminals with the wires disconnected. Ground X power Y and vice versa. No clicking, just some tiny sparks. I...
-
2240hippie replied to the thread No AC output.I checked the fuse with my MM ohms. If I remember right the fuse is a time delay reset. I did remove it to test. I did apply 24V to X...
-
Make sure you get every last speck of sand out of the thermostat housing and the water passages. Also might want to change the gasket... -
Didn't you already say the HZ meter and outlet were working? if so you are making power. I've just skimmed over this whole thread... -
RRay70 replied to the thread 1969 MEP 10K Generator.$48!? Does that particular TM weigh 40 lbs. or something? it should qualify for USPS media mail for like $5, sounds like someone is...
-
need a to b b to c and c to a both sides
-
Guyfang replied to the thread No AC output.Okay, I already took it off completely. No improvement. Still nothing on the voltage gauge. Hertz is running 60 on the nose. The light...
