• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Latest activity

What's new

What's new New posts New profile posts Latest activity

BMI

Midwest Military Equipment

Eastern Surplus & Equipment Co

Staff online

Members online

Total: 6,008 (members: 12, guests: 5,996)
  • Robert P
    Robert P replied to the thread MEP 1030A.
    I look into that this afternoon. I really appreciate the help. Thanks
  • Robert P
    Robert P replied to the thread MEP 1030A.
    Hello, don't have any lights or anything, its completely dark.
  • Robert P
    Robert P replied to the thread MEP 1030A.
    Ok I'll do that, i did check that breaker and it seemed ok, i got continuity through it but didn't check for voltage. Thanks
  • Robert P
    Robert P replied to the thread MEP 1030A.
    Hello thanks for the response, can you provide me contact information, i just started this forum yesterday and don't know who anyone...
  • J
    JimC2 replied to the thread Need 16x9 flaps.
    Ordered two 16x8 flaps
  • J
    JimC2 replied to the thread New Tires.
    Found a complete soft top frame in the hangar, and the two rear axles for the 708.
  • M813rc
    M813rc reacted to wgtactical's post in the thread V100 provenance with Like Like.
    Rory I have to admit that luck was probably the largest contributor to the success of this project. Had it not been for early photos...
  • TOBASH
    TOBASH replied to the thread Hmmwv 400 amp alternator conversion from 210 amp.
    Most people swap the other way. The 400 amp is large and cumbersome and even causes issues for some people. It requires different...
  • jmenende
    jmenende reacted to LuckeyD's post in the thread Mep 806b fuel sender issues with Like Like.
    Good Day everyone. The sender is connected from the sending unit straight to the I/O TCM 100 module with 2 wires. The senders get...
  • Tow4
    Tow4 reacted to TechnoWeenie's post in the thread M929 Questions with Like Like.
    If you don't remove the return line, it's gonna suck it all in pretty quick....and dump most back in the tank and dilute it. I forgot...
  • 6
    65grendel replied to the thread Hmmwv 400 amp alternator conversion from 210 amp.
    I'd consider trading you my 400 amp for your 200 amp if your interested.
  • Delirium
    Delirium reacted to Ronmar's post in the thread P6 thrust bearing dodged a bullet… with Like Like.
    I am very glad I did this! Looked great inside, popped off the outer clutch pack snap ring and lifted out the clutch pack and carrier...
  • frauhansen
    frauhansen replied to the thread Hmmwv 400 amp alternator conversion from 210 amp.
    I'm not necessarily THE expert when it comes to charging batteries. But have you checked how much load your batteries can actually...
  • DieselAddict
    DieselAddict reacted to kloppk's post in the thread MEP 1030A with Like Like.
    You may want to carefully verify the DCS is being provided +24 volts to the P2 plug on the back of the DCS. B+ pins should have +24...
  • frauhansen
    frauhansen reacted to DREDnot's post in the thread OUT AND ABOUT WITH MY HMMWV with Like Like.
    Display at an outdoor western bar for military and first responder appreciation night.
Show older items
114,030members
167,051threads
2,351,784posts
6,009online users
Top