• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Latest activity

What's new

What's new New posts New profile posts Latest activity

BMI

Midwest Military Equipment

Eastern Surplus & Equipment Co

Members online

Total: 3,777 (members: 29, guests: 3,748)
  • J
    JimC2 replied to the thread Need 16x9 flaps.
    Will do. Probably several more days before they arrive.
  • 2
    2Pbfeet reacted to Guyfang's post in the thread Mep 831A load issues with Like Like.
    Take a picture of the linkage unpowered, and powered up.
  • L
    LuckeyD replied to the thread MEP 1030A.
    Supercool! Just check the Battery power to the DCS as indicated in the manual. Power there, check the pins for ground. If no power...
  • G
    grywitt replied to the thread Mep 831A load issues.
    Powered with no load? It's weird right now i don't know if I accidentally bent the linkage or something. The magnet won't hold the arm...
  • Sharecropper
    Sharecropper reacted to vanaisa's post in the thread Windshield Polishing with Like Like.
    Then just try this product. Dont get glass hot (if you use power drill thing) and dont push too hard. Do some 2...3 minutes polish and...
  • gottaluvit
    gottaluvit reacted to publicenema's post in the thread Polaris MRZR-D4 with Like Like.
    Looking at the breakdown of the main case, I don't see a differential anywhere. The only polaris's that have an unlockable rear axle to...
  • Robert P
    Robert P replied to the thread MEP 1030A.
    I don't have any power anywhere but the Dead crank switch, no fuel, lights anything..
  • Robert P
    Robert P replied to the thread MEP 1030A.
    Thanks so much, as soon as I get home I'll take a good look, i really appreciate it. Robert
  • O
    oakley1919 replied to the thread removing blackout lights.
    as you said an ancient thread. did you ever figure out your light problem with the left turn signal indicator coming on with the service...
  • owensexport
    owensexport posted the thread CA Diagraph Bradley JUMBO stencil Machine - Needs Work in Tools and Misc for sale.
    1-3/4" size Jumbo Stencil machine. It is complete, turns and advances the paper when punching. The dies need alignment and cleaning, it...
    • PXL_20250819_180248822.jpg
    • PXL_20250819_180303868.jpg
    • PXL_20250819_180253341.jpg
    • PXL_20250819_180256824.jpg
  • Tinstar
    Tinstar reacted to fuzzytoaster's post in the thread The new "green" trailer? JLTV-T with Like Like.
    Piles of broken plastic fenders hitting GP in 3.. 2.. 1..
  • D
    DrtyDan replied to the thread Air System Issue - Brakes Locked Up.
    Is the RN60A the correct part for an MTVR, I have seen it listed as RN60V in some places. I have a 2001 MK23 with the same problem as OP...
  • Guyfang
    Guyfang replied to the thread Need 16x9 flaps.
    When you get them, say something.
  • Guyfang
    Guyfang reacted to LuckeyD's post in the thread MEP 1030A with Like Like.
    Good Day: Below is a link to Technical manuals for your generator. Several members have tried to point you to the probable issue...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Haha Haha.
    Yes. Do not plug anything in with a motor (unless you really don't like the item you're plugging in) Sent from my SM-S908U using Tapatalk
Show older items
114,008members
167,051threads
2,351,709posts
3,777online users
Top