• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Latest activity

What's new

What's new New posts New profile posts Latest activity

BMI

Midwest Military Equipment

Eastern Surplus & Equipment Co

Staff online

Members online

Total: 9,145 (members: 9, guests: 9,136)
  • Gcelevator
    Gcelevator reacted to springer1981's post in the thread My new 1992 M998 Avenger with Like Like.
    I made a short video to show some of the mods I made. Let me know what you think.
  • NDT
    NDT replied to the thread P6 thrust bearing dodged a bullet….
    So your aluminum bushing you made is to duplicate: "composite thrust washer 3 times as thick as the A or B roller thrust bearings"...
  • Robert P
    Robert P replied to the thread MEP 1030A.
    The pins are in place and shiny clean, when I tested the negative d,e,f on cable p2 I didn't get the audible buzz sound I was expecting...
  • 8
    87cr250r replied to the thread P6 thrust bearing dodged a bullet….
    An aluminum bushing?!?
  • Lawdog734
    Lawdog734 reacted to gottaluvit's post in the thread Polaris MRZR-D4 with Like Like.
    I ordered one from Cobra axles. That one should last longer!
  • M
    MugOfPaul replied to the thread P6 thrust bearing dodged a bullet….
    Oh I just remembered I took photos when I inspected my 2007 A1R a few months ago.
    • IMG_0104.jpeg
    • IMG_0103.jpeg
    • IMG_0102.jpeg
  • DieselAddict
    DieselAddict replied to the thread MEP 1030A.
    Did you check the NEG side to ground? How do the pins look? Are they all in place and none pushed back?
  • sneekyeye
    sneekyeye replied to the thread NO START.. M1031 12v Doghead.
    Make sure your 12v is getting to the starter solenoid from the relay. If you manually triggered the starter with a screwdriver and it...
  • Robert P
    Robert P replied to the thread MEP 1030A.
    Hello, i just checked A,B,C and confirmed 24v is present, when checking d,e,f i didn't get the audio beep for continuity i was...
  • juanprado
    juanprado replied to the thread Need 16x9 flaps.
    I am dumbfounded at what some vendors are selling these flaps for. Bat doodo crazy....even with the tariffs we allegedly won't have to pay.
  • M813rc
    M813rc reacted to allie's post in the thread M931 tractor mirrors with Like Like.
    great ill take a look thanks !!
  • G
    grywitt replied to the thread Mep 831A load issues.
    https://youtube.com/shorts/I8I4koJT9eU?si=VkErRneuLryf-NXV https://youtube.com/shorts/Yx3itN51EN4?si=gVTEjXyZEDIo9P04 The long one i...
  • G
    grywitt replied to the thread Mep 831A load issues.
    This is the pic with it shut off. When I turn the switch to off it goes over to the magnet for a couple seconds then it let's it go and...
    • 20250819_171153.jpg
  • R
    Ronmar replied to the thread P6 thrust bearing dodged a bullet….
    Yes it costs that much… it took me a half hour to cut a blank out of aluminum plate with a pair of hole saws and about a half hour to...
  • John Mc
    John Mc replied to the thread Need 16x9 flaps.
    I came across a couple of places offering flaps when I was searching for 9.00x16 tires on eBay. Here's one link selling a set of 4 tubes...
Show older items
113,868members
166,938threads
2,350,386posts
9,145online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks