-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Latest activity
What's new
BMI
SECO
Midwest Military Equipment
Eastern Surplus & Equipment Co
Members online
- darkslide750
- cucvrus
- zerskier
- Nailhead
- Joe Bertram
- Rupertlr
- fsearls92
- Retiredwarhorses
- Robhawg
- Goldy
- luke2pl
- tarster
- lpcoating
- SGT.Moose.951
- littlesfmtv
- cattlerepairman
- Lawdog734
- Capt.Moondog
- boughtnobuilt
- Mullaney
- kurtvk
- NY Tom
- Light in the Dark
- 4x4Junkie13
- fuzzytoaster
- joe white
- ehinlein
- REF
- Lobster112
- bbtodd
- cwc
- M35A2-AZ
- greenswoave
- M35fan
- Theo
-
Mullaney reacted to MatthewWBailey's post in the thread Steel Soldiers MV of the month 2024 - March VOTE HERE! with
Like.
I guess I need to bump🇺🇸😉 Me at the steel yard pickup. 24' steel pipe for the solar. No I don't own a trailer, yet. People gather... -
Mmaggie8264 replied to the thread I am baffled!.The splines on the input gear appear to be fine. So, I'm thinking I must have a 12K input gear in my 10K hub. Will a 12K half shot...
-
-
I used Raptor liner with their spray gun. Did one heavy coat on everything. If I bought more, I probably would have done a 2nd coat just... -
Replacing the seal and gasket on the front pump went surprisingly well. Homemade slide hammers work well except for the one pinched... -
I used Raptor liner with their spray gun. Did one heavy coat on everything. If I bought more, I probably would have done a 2nd coat just... -
RI thought so too. We will see what happens when the input wires are disconnected from K1. Once taped up, and posing not great harm to...
-
Awol replied to the thread AWOLs 1997 M1097A2 Build.I used Raptor liner with their spray gun. Did one heavy coat on everything. If I bought more, I probably would have done a 2nd coat just... -
-
RIf you still have a short, then its in the main gen. Would like to work longer, but someone is standing here with a club. Later!
-
RIts 01:22 here, so I am going to bail out. Sounds like a short in the K1, or maybe someone fooled with the TB1. I would take the input...
-
RI also saw that your hertz meter moved. Normally it will not read without ACV. So here is where you start if you can use a DMM. 1. set...
-
RI hope you have the set grounded. Here is what I saw. Engine starts well. BUT, the gen set never showed any voltage on the AC meter...
-
98G reacted to m1010plowboy's post in the thread Does anyone "float the gears" when shifting M39/M809? with Like.
Had a hippie teach me how to float a 5 and 4 international back in 1981. Wasn't his truck so the lesson was free but I drove that truck... -
Replacing the seal and gasket on the front pump went surprisingly well. Homemade slide hammers work well except for the one pinched...
-
deank replied to the thread Central FL M1031 project.Replacing the seal and gasket on the front pump went surprisingly well. Homemade slide hammers work well except for the one pinched... -
-
Mogman replied to the thread I am baffled!.Have them inspect the splines on the input gear, also have them pull the magnetic drain plug, if that is a 10K gear and the splines are...
