Does anyone know where or how to get the bit/tool holding thing that goes into the side toolbox? I think it's some kind of molded plastic or something. But I can't really carry my tools properly without it it seems because they rattle around.
Also, the clamps that hold up the jackhammer and drill - are they supposed to be metal on metal with the tool or is some kind of rubber missing?
.
Possibly the box like this?
From the TM, TM 5-2420-224-24P-2 posted here on the site. PDF Page684, 0360 00 is the page number in the document.
Chances are after re-reading what you asked, this might not be it - but if we can figure out what the box might be called - maybe it will be in this book?
EDIT: Found some really detailed instructions on repairing four of the hydraulic tools.
Section I.
Section Il.
Section Ill.
Section IV.
Page
Hammer Drill Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-1
Impact Wrench Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-15
Pavement Breaker Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-24
Chain Saw Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-37
TM 5-2420-224-34, Page 21-1