teletech
Active member
- 426
- 209
- 43
- Location
- santa cruz,ca
Welcome, looks like a fun rig.
...and now I know who to call when I need my CVR(T) towed!
...and now I know who to call when I need my CVR(T) towed!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
new guy from Northern california.
- Thread starter gromm415
- Start date
Kloakndagr
New member
- 266
- 4
- 0
- Location
- On The Road/California
Welcome from Paso Robles, CA.
71DeuceAK
Well-known member
- 1,493
- 346
- 83
- Location
- Fairbanks, Alaska
@Kloakndagr, wow Paso Robles? I grew up in Atascadero. I occasionally come back to visit, would love to meet up with other MV hobbyists in the area...
gromm415
New member
- 14
- 0
- 0
- Location
- woodacre, ca
Thanks! Paso is a fun town. My cousin lives there but is currently in Afghanistan. Do you ever go to pappy mcgregors? The flag and hat in the case above the bar on the lefthand side is from my cousin.
gromm415
New member
- 14
- 0
- 0
- Location
- woodacre, ca
Thanks, it's fun. I just replaced the transfer pump and fuel filters. Runs great now. I'm going to take it for a shake down run this weekend and hope its good to go. It has some armor in the cab I'm curious about. Also, it looks like something big was welded into the bed. I wish I knew the history of this truck!Welcome, looks like a fun rig.
...and now I know who to call when I need my CVR(T) towed!
71DeuceAK
Well-known member
- 1,493
- 346
- 83
- Location
- Fairbanks, Alaska
I am not all that familiar with Paso actually! I had friends who lived waaaaay out Stockdale Road though.
- 2,135
- 612
- 113
- Location
- Davis County, UT
Coool! Welcome welcome.
The only thing I know is don't operate the truck in reverse if the transfer case is in low range. The truck may or may not have a lockout preventing it. If you do, catastrophic transfer case explosion may occur. But you probably already know this.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
http://www.steelsoldiers.com/showthread.php?146306-Don-t-Use-Low-Range-Reverse-with-939-s-Here-s-Why-!!
The only thing I know is don't operate the truck in reverse if the transfer case is in low range. The truck may or may not have a lockout preventing it. If you do, catastrophic transfer case explosion may occur. But you probably already know this.
http://www.steelsoldiers.com/showthread.php?146306-Don-t-Use-Low-Range-Reverse-with-939-s-Here-s-Why-!!
Last edited: