Ok i have my Mep rewired for a sx460 AVR, now it keeps poping the 7.5 amp breaker on the front of the machine and shutting down. I removed P60A from the A1 relay. That stoped poping the breaker, but the engine will only keep running when held in the start position, and then the generator will only put out 0.8 to 1.1 volts AC. When reconnected the volts jump to about 30 just as the breaker pops.
I read about there needs to be a 50 ohm resistor wired into the field wiring to prevent the breaker from tripping, where should i wire the resistor in? or is there another solution?
I read about there needs to be a 50 ohm resistor wired into the field wiring to prevent the breaker from tripping, where should i wire the resistor in? or is there another solution?