• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

What did you do to your deuce this week?

Seth_O

Seth_O

Member
625
7
18
Location
Sac CA
Started the R&R on my new-to-me heater for the truck. After battling some very light rust I got the heater box disassembled, next step is to sand and paint. The core looks good and seems to hold pressure, although I had to blow a BUNCH of fine shredded material out of it, looked like some wee critter was trying to make a home in there.

heater 1.jpgheater 4.jpg
 
Last edited:
Another Ahab

Another Ahab

Well-known member
17,825
4,157
113
Location
Alexandria, VA
Seth_O said:
The core looks good and seems to hold pressure, although I had to blow a BUNCH of fine shredded material out of it, looked like some wee critter was trying to make a home in there.
Click to expand...
Maybe, during your off-season, you should just charge the little guy rent:

- You could ask top dollar what with the built-in exercise wheel. :mrgreen:


home.jpg
 
goodwithwood35

goodwithwood35

Active member
Steel Soldiers Supporter
327
51
28
Location
Bakersfield, CA
Ratchetop said:
I received the 5th gear kit today. I will be removing the trans over the weekend. Thank you Tom for the fast shipping. Can't wait to get it installed. :clinto:
Click to expand...
Nice! I ended up having to buy a new 2nd gear with the holes already drilled in it from Memphis equipment. Couldn't find a machine shop that could drill or mill through mine, it's super hard even with carbide bits.
 
Ratchetop

Ratchetop

Member
69
0
6
Location
Saginaw Texas
That's probably not a bad idea. If I see any ware on 2nd when I get it apart I'll go ahead and get a new gear but if it looks ok, I have access to a mill and will try to modify it my self. Worst case I have to buy one anyway.
 
pitpawten

pitpawten

Active member
259
199
43
Location
Centreville, Maryland
scboolitcaster said:
OK dumb new guy question..
What kind of hoist is that? Is it aftermarket or made for the deuce from the military?
Click to expand...
Its your standard Habor Freight bed crane but modified to be more useful by the PO. He added some bearings to it to help it pivot under load, as well as put a mount on the bumper for it to help with pulling heads.

Oh, and most importantly...he painted it OD :D
 
daytonatrbo

daytonatrbo

Member
320
3
18
Location
Tricities, TN
pitpawten said:
Its your standard Habor Freight bed crane but modified to be more useful by the PO. He added some bearings to it to help it pivot under load, as well as put a mount on the bumper for it to help with pulling heads.

Oh, and most importantly...he painted it OD :D
Click to expand...
I have a similar crane that I'm hoping to eliminate the mounting foot and make a tube in the bed to receive it. I'd also like to put a mount on the front bumper for it so I can move things around with the truck and see what I'm doing.
 
fpchief

fpchief

Well-known member
1,041
218
63
Location
South Alabama
Wish I had a m109.....I took mine out of the driveway for the first time since I replaced the transmission, clutch, rear main, full interior re-do, and full paint job. Drove good, clutch releases at top of pedal. Think I might need to adjust it some
 
You must log in or register to reply here.
108,333members
163,636threads
2,302,531posts
1,106online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks