• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Power steering pump bracket

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
Yeah I was thinking suicide on how tight it came out.
McMaster-Carr got the ID and OD on what I wanted for the job

Sent from my SM-J337U using Tapatalk
 

Valor

Active member
185
192
43
Location
Apple Valley, Ca.
Yeah I was thinking suicide on how tight it came out.
McMaster-Carr got the ID and OD on what I wanted for the job

Sent from my SM-J337U using Tapatalk
I would put some anti-seize on those bolts when you reassemble. You can use RTV on the wet holes. That acts as a lube for the threads too. Clean up everything first. Good luck. Nice job.
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
Going to bite the bullet because of availability and have my 4 core radiator recored, quite pricey, I was wondering if these isolators would fit OE properly they say for 3 row though. anybody have any information? Will they fit.




Sent from my SM-J337U using Tapatalk
 

cucvrus

Well-known member
11,263
9,552
113
Location
Jonestown Pennsylvania
NO they are not the correct ones. You need the Big Block Chevy ones.
Radiator Isolators Big Block (4pcs) #7-1712
These are the urethane ones. They will last forever. Good Luck.
 

german m1008

Well-known member
Steel Soldiers Supporter
883
1,302
93
Location
Rhein-Main Area, Germany
Going to bite the bullet because of availability and have my 4 core radiator recored, quite pricey, I was wondering if these isolators would fit OE properly they say for 3 row though. anybody have any information? Will they fit.




Sent from my SM-J337U using Tapatalk
......... I also used them on my M1008 brass-copper 4 rows radiator , they might not last forever but they worked.
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
I would have the bolt stud you need as a replacement. Do you have any threads that are usable to get a stud started? Give the drill and remove tactic a try and report back. I myself just buy replacement parts from any of the local auto parts dealers. I look for the best price and the best warranty, Lifetime is the best you can get.
Duralast Radiator B850 (autozone.com)
Fan Clutch - Find the Right Part at the Right Price | AutoZone
Duralast Fan Clutch 22045 (autozone.com)
I would use this water pump. Good price and great lifetime warranty.
Duralast Water Pump DWP-598 (autozone.com)
Other may use this water pump. Over priced with a lifetime warranty and it is still imported from Main Land China.
ACDelco Water Pump 251-591 (autozone.com)
No difference it pumps water and keeps the engine cool. The name is what they are trying to sell. Good Luck and let me know about the stud.
Do you have part # for ps pump / rebuild kit or replacement?? Or reccomendation

Thank you

Sent from my SM-J337U using Tapatalk
 

cucvrus

Well-known member
11,263
9,552
113
Location
Jonestown Pennsylvania
No need to get fancy and spend the big money. These pumps were the same for many years.
Endurance Power Steering Pump 7068 (autozone.com)
This will get you the basic rebuilt pump and it will work great for many years. At least that has been my experience. Warranted for ever.
Duralast New Power Steering Pump 7068N (autozone.com)
This will get you a new pump. Warranted for ever. The choice is yours. Good Luck. If you are changing the pump do all the hoses at the same time. They are all old and internally worn and brittle.
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
Yes received bolt stud, I owe you. also ordered the rebuild pump from AutoZone. trying to move forward having to wait for the the rad recore

Sent from my SM-J337U using Tapatalk
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
What proper wrench fits in here to tighten pump belt without destroying Reservoir??

Big Thank you to the one that knows

JC


Sent from my SM-J337U using Tapatalk
 

Sharecropper

Well-known member
Steel Soldiers Supporter
1,814
942
113
Location
Paris KY
This is what I use. Works like a champ. Can't remember where I bought it. The thing hooks onto the side of the bracket and has a place for a square-drive pull handle or ratchet to attach. You should be able to search online and find one. Remember to tighten the power steering belt before the drivers' side alternator above it. Also while you are at it, I suggest you check the alignment of the PS pulley to the boss pulley on the water pump. If the PS pully is not aligned perfectly, the PS belt, as well as its mate the alternator belt, will squeal and wear prematurely. I did a write-up on the importance of belt alignment a couple years ago - https://www.steelsoldiers.com/threads/squealing-belts-and-how-to-fix-them.189721/

Hope this helps.


power steering wrench.png
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
Yes I do see some alignment concerns, trying to figure out how to get that straight also .
but I don't know, doesn't seem like it should. Haha

Sent from my SM-J337U using Tapatalk
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
Made this little square piece to try to fit in there and tighten it up. will see if that wotks


Sent from my SM-J337U using Tapatalk
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,249
18,774
113
Location
Charlotte NC
Made this little square piece to try to fit in there and tighten it up. will see if that wotks


Sent from my SM-J337U using Tapatalk
.
That might work! When I saw the hole in that bracket I really wondered WHY it was where it is. Most of the time, that square hole can be accessed with a half inch ratchet or pull bar. The tool that Sharecropper offered up is pretty fantastic! I did a few searches and using "alternator tensioner tool" pulls up several variations.

As farr as the alignment front-to-back, some brackets are different than others. If you had all the original brackets and nobody ever swapped any parts - everything should line up. Often times a couple of washers will space an alternator or pump forward or back for alignment.
 

jcollings

Well-known member
Steel Soldiers Supporter
525
347
63
Location
Jupiter/FL
This is what I use. Works like a champ. Can't remember where I bought it. The thing hooks onto the side of the bracket and has a place for a square-drive pull handle or ratchet to attach. You should be able to search online and find one. Remember to tighten the power steering belt before the drivers' side alternator above it. Also while you are at it, I suggest you check the alignment of the PS pulley to the boss pulley on the water pump. If the PS pully is not aligned perfectly, the PS belt, as well as its mate the alternator belt, will squeal and wear prematurely. I did a write-up on the importance of belt alignment a couple years ago - https://www.steelsoldiers.com/threads/squealing-belts-and-how-to-fix-them.189721/

Hope this helps.


View attachment 844302
I found that tool at Year One, that must have been where you got it from. so when you hook it , can you hook it when the upper alternator is installed on the driver side?

Thank you...

Sent from my SM-J337U using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks