Spindle bushing specs

[harley1]

I have a 1971 M35A2. I am looking for the specs on the spindle bushings. Axle OD , bushing ID , min and max. I looked on the forum could not find, I can find the specs for king pin and bushing.
Thanks in advance.

 

[GopherHill]

The tech manuals are available on this site to download. They will have the information you need.

 

[harley1]

The tech manuals are available on this site to download. They will have the information you need.

Thank you
I will check it out again

 

[ldmack3]

Yea I just went through that. May have to get certain specs from different manuals.

 

[harley1]

Yea I just went through that. May have to get certain specs from different manuals.

Thank you
I went thru the TM’s again and could not find. Mine has .008 . When the kingpin bushing has a min of .001 to max of .002. .008 sounds like a lot. I replaced the bushing on a replacement spindle and honed to .0015 . Spins freely but I think it needs more clearance for grease. Any help would be great. Thanks

 

[gringeltaube]

I am looking for the specs on the spindle bushings.....

Looked up TM 9-2320-209-20P, Oct 1976, found in Fig.108, Item #28: NSN 3120-00-661-9035 Bearing, sleeve

Googled above NSN -> https://www.iso-group.com/NSN/3120-00-661-9035



I still have some NOS bearing sleeves stored somewhere, so I could measure them to confirm above specs - if I can find them...

 

[harley1]

Looked up TM 9-2320-209-20P, Oct 1976, found in Fig.108, Item #28: NSN 3120-00-661-9035 Bearing, sleeve

Googled above NSN -> https://www.iso-group.com/NSN/3120-00-661-9035

View attachment 854135

I still have some NOS bearing sleeves stored somewhere, so I could measure them to confirm above specs - if I can find them...

Thank you very much