• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Spindle bushing specs

harley1

New member
I have a 1971 M35A2. I am looking for the specs on the spindle bushings. Axle OD , bushing ID , min and max. I looked on the forum could not find, I can find the specs for king pin and bushing.
Thanks in advance.
 

harley1

New member
Yea I just went through that. May have to get certain specs from different manuals.
Thank you
I went thru the TM’s again and could not find. Mine has .008 . When the kingpin bushing has a min of .001 to max of .002. .008 sounds like a lot. I replaced the bushing on a replacement spindle and honed to .0015 . Spins freely but I think it needs more clearance for grease. Any help would be great. Thanks
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks