• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by 68427vette

  1. 6

    Well another LVT-4 gets to come back to life...

    i heard 4 of them are going to a collector in PA?
  2. 6

    Department of Defense Control Coming

    ok what happened????
  3. 6

    Diamond T M20 Prime Mover

    i'm sure you knew this one and the trailer just sold for $16,500 http://www.auctionsamerica.com/events/feature-lots.cfm?SaleCode=MM12&ID=r1079&Order=runorder&feature=grouping= jc
  4. 6

    M-662 ford GTB burma jeep

    I'm parting a berma on ebay right now: G503.com Message Forums • View topic - Attention GTB Series Owners also look on g503 undder discussion forums,, under 1/2 to 2 ton trucks,, G503.com Message Forums • View topic - Attention GTB Series Owners for more info,, tom wolbolt is a good...
  5. 6

    Burma Jeep Information

    Im parting a berma on ebay right now!! 68427vette | eBay also look on g503.com under 1/2ton through 2 ton in discussion forum for more info!! G503.com Message Forums • View topic - Attention GTB Series Owners
  6. 6

    MVPA Show in Huntsville, AL

    get some photos of that early wwii COE, behind the cckw.. the cabover truck, please......jc:jumpin: pretty please...
  7. 6

    Post blasting / sanding flash rust elimination tests

    LOL,, well,, i read,, "first restoration" and otehr stuff,, and "roller"" and thought ,, oh dear!! :-P yes,, discussion is great,, !! learn something new everyday!!! !! like not to use a roller!! :doghead: well i knew that!!:beer:
  8. 6

    Post blasting / sanding flash rust elimination tests

    man oh man, " MasterSeries MCU I used is designed to be applied with a sponge roller" wow,, a roller... i'd scratch that one off my list, to use... clean parts, clean, surface, clean AIR, to paint with.. roller???fat lady sings leaves stuff behind,, as we can tell by your test...
  9. 6

    Post blasting / sanding flash rust elimination tests

    get yourself set up, blast the parts,, and then DA them down, or scotchbrite pad them, prep/ (prepsol), dry , then shoot epoxy primer.. do smaller batches of parts,, get into a assemble line routine,, HECK, i've brought parts inside overnight(sorry wifey) when i couldn't get the job...
  10. 6

    Post blasting / sanding flash rust elimination tests

    like i said, i applaud you for ,spending this amount of money,, and time,, but,, rolling paint on with pieces of sponge, allows air/ and mositure to penetrate to the raw metal surface underneith..., air+moisture= rust/paint lifting.. and not sticking... 2cents
  11. 6

    Post blasting / sanding flash rust elimination tests

    6.) EPA,, and clean-up!!! water drain bins, EPA separator socks etc,, regular sand,, is easy clean-up, poundage in, must = poundage out or more, per month(to the dumpsite) i applaud your attempt to test these,:beer:, but manufactures spend millions of dollars testing... lots of errors in a...
  12. 6

    Post blasting / sanding flash rust elimination tests

    turn your air down,, your shooting air bubbles into your paint!! and i think you have to have an epoxy under TM paints,, i dont know what MasterSeries Silver primer is etc..??? but your test paint tabs look , lets just say, not so good,, there's dirts/dust or air on your tabs,,, which...
  13. 6

    Post blasting / sanding flash rust elimination tests

    TM9Ordnance paints are the best paints,, PAUL has spent alot of time , for the hobby, to develop the "correct shades". now that topic will go on forever also, "correct shade of wwii paint" LOL :deadhorse: i use all TM9Ordnance paints.. they have a nice correct crysislis low absorbing...
  14. 6

    Post blasting / sanding flash rust elimination tests

    your thinking WAY to hard on this,, i sand blast for the local hot rod shops from 200k cars to simple parts,,, the key is to get the parts/ or whole cars into epoxy primer, asap, and not to wait overnight. even if your going to be doing metal work,, just mask off those area with 3m tape...
  15. 6

    I guess this qualifies, as over 5 ton. LVT4

    yes someday,,, i have another LVT4A coming soon,, its the closed top 75mm turret!!:beer:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks