Recent content by AaronHorrocks

I have an M172A1, and I need ramps for it. Do you have original ramps? Also I'm missing the plates that go in the deck over the tires. It looks like you have those. My trailer is in a museum right now, and we'd like to fix it up to put it to use. We'd really appreciate it if you could take...

I have a Vinyl Cargo Cover with a couple of large worn out spots on it. I was wondering if there was anyway to repair it? I also have a section of a cut up cargo cover that I could use to make patches and glue them on. Can anyone recommend a glue? Is that a good approach?

I said that I removed all of the bolts. I did. I took that photo for reference, before I began any work. Since that photo, I removed the fan, removed the bolts and plate from the crank pully, marked and loosened the bolt to the alternator, removed both of those belts... Then got stuck. I have...

I don't think it's like a Deuce. I removed all of the bolts, and neither pulley will budge.

So as long as I have the radiator out, I decided to replace the aging belts. Currently, my server is down, so I don't have access to my library of ETMs. The generator belts were easy enough to remove, but I can't get the belt off for the compressor. Do either of these pulleys come off easy...

A Dodge 3500 will be overkill. It's a job that an F150 could do.

Disconnect any electrical components that are mounted on fender. Loosen bolts between grill and fender. Remove bolts connecting fender from body tub. Remove fender. Loosen large main through bolt on bottom center of grill (if in place). loosen and disconnect grill mounting rods (2 large rods...

A bunch of trailer parts, including two landing leg assemblies. The landing legs weigh (wild guess) 50 pounds each, and each leg would need to be boxed up separate... and the misc parts would go in a 3rd box, probably. The landing legs would be the largest parts. Everything would fit in the...

How do you know what the GVWR of an old military vehicle is?

Is there anyone in or near Jacksonville, FL that could pick up some Military Vehicle parts (local pick up only), and ship them to me? Full compensation for fuel, time, and shipping costs.

Do you still have the landing legs? I need the entire assemblies. Can you send me some photos, please?

There's one in Littlefield's collection

I've been told that too... Even by USMC Military Police. But after they were on the phone with the CHP, and got the specifics, they had to let me go. Because I was in the clear to drive a 3 axle 17,xxx lbs truck, registered as a historical vehicle. It turned out a USMC officer (that has seen...

Can I get away with a standard drivers license now that its only two axles? Why do you think having 3 axles is an issue in california? You're still under a HISTORICAL VEHICLE exception. I know that I couldn't keep Classic Car insurance if I change out the engine in my M38A1 to something more...

Give me a couple months, and I bet we can make a deal.