• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by AMgeneral3945

  1. A

    M920 pto pump

    Ok thanks for the help
  2. A

    M920 pto pump

    Other than that any pump would work? just has to be ccw.
  3. A

    M920 pto pump

    Is it just a standard pump like any other truck with a wet kit?
  4. A

    M920 pto pump

    The seal on the pto pump went out and mixed with the transmission oil. Looking for a seal kit for the pump and where the pump mounts on the trans. Wondering if anyone knows where to get them. Or should I put a different pump on it that has one outlet? Also, are there pto pumps that allow you to...
  5. A

    Mounting 445s on M920

    Ok thank you. I already have 395s mounted on the steer axle so Im going to let that be.
  6. A

    Mounting 445s on M920

    Those look like some great tires. Do you know where to get budd rims that are stud pilot for the 445s? Thanks for the help, I really appreciate it.
  7. A

    Mounting 445s on M920

    Yea we do a lot of driving on the road. It's the main reason we got the truck because a tractor and tankers would take a long time. Our main options maybe the 445s or 525s. Got to be a tire that'll work, just havent found it yet
  8. A

    Mounting 445s on M920

    Thanks for the reply. The 24r21s would be great but the height will be an issue I think. Did some research and maybe the 525/65r20.5 would work.
  9. A

    Mounting 445s on M920

    We setup a M920 for hauling liquid manure on the farm. I put 395/85r20 on the front and it worked well, just had to grind the hubs some. But on the rears I kept the 11.00r24 and had them retreaded with a more aggressive tread. The thing I don't like is the dual 11.00r24 sink in too much in...
  10. A

    Simp's M920 build thread

    What rims did you use for the 445s?
  11. A

    Am General M920 tire sizing

    Ok, we’ll probably end up doing this. Seems like a nice option to have. Thanks for the idea and help
  12. A

    Am General M920 tire sizing

    That would be nice to have. Thanks for the help. Is it hard to wire in another switch?
  13. A

    Am General M920 tire sizing

    Ok I see what you mean, but what is the benefit of doing that? Could there be potential failure with the drives or is it just having the option of the front axles locked without having to have both the front axle and front tandem axle locked at the same time.
  14. A

    Am General M920 tire sizing

    What do you mean by, redo the power divider switch. Wouldn’t turning the front axle switch off work?
  15. A

    Am General M920 tire sizing

    Hi, we bought an Am General M920 for farm use, we will be using to haul liquid manure. We mounted a 4800 gallon tank on the back to do so. I have been working on tires for the truck and I had the rears retreaded with a more aggressive tread. The tread is BLSS from bandag, which looks like it...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks