• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by atvcat33

  1. atvcat33

    BFR Metals, Salina Kansas, a Goodie Hole

    cost of ISO bed complete with sides "I remove"
  2. atvcat33

    Steel Soldiers MV of the month 2015 - February VOTE HERE!

    The month isn't over yet but I vote for Taylor too
  3. atvcat33

    m818 repower

    Ive been down this road..... heres the situation.... with the non turbo motor, i pulled 1500° on the pyro with a 15,000lbs trailer the same egts were obtained when empty... after adding the turbo i never ever went over 900°. Which is perfect. I only got a 10psi of boost and that was all. Any...
  4. atvcat33

    Spring PoofStock 2012

    gotta work late on friday, find how to get home from rice lake get sleep figure out what im taking to poofs and get back up north by monday night....... GGRRRRRR!!!!
  5. atvcat33

    Trans shift issue

    my 1009 shifts at 38 and 47 mph too. no other issues, goes into gear fine, no slipping. but the faster i take off the smoother it shifts. but if i baby it around it will give me whiplash when it shifts..... i tried the same things as you. i am going to just take it in and have a professional...
  6. atvcat33

    replacd new inj. pump, now truck runs terrible, need help guys....

    i assume pulling the valve cover is the way to check to make sure valves are closed??? and out of the 3 timing marks on the harmonic balancer i used the lds-465-1, have a lds-465-1c, so i do belive i had it on the correct mark. it could be 180* out of time, but **** im stumped gimp
  7. atvcat33

    replacd new inj. pump, now truck runs terrible, need help guys....

    had a crack in the old pump, and i replaced with a military depo rebuild pump. upon installation me and kenny checked the timing mark on the pump under the 4 bolt plate and the mark was 1/4 above the the timing pointer, but so was the old pump still on the motor with the timing mark on the 3rd...
  8. atvcat33

    PoofStalk fall 2011

    hwy sc is closed at hwy 16 west, call poof for the detour route, coming from illinois it may have you run hwy 16. FYI i will be in convoy with kenny, be there mid morning i hope
  9. atvcat33

    PoofStalk fall 2011

    no semi, no duece, but i will have a new toy, its a secret!!!!!!:-P
  10. atvcat33

    818 w/ turbo & jakes haulin logs

    seems as though you are jealous greg, you wish you had that truck to pull and tow all of your broken junkers, lmao:)
  11. atvcat33

    818 w/ turbo & jakes haulin logs

    no firewood, that isnt my buisness greg, i just haul it, lol, yes there is a small 1/4 line of mt dew injection right to the driver lmao
  12. atvcat33

    818 w/ turbo & jakes haulin logs

    after updatin to a turbo and jake brakes i really havnt used the truck, but hauling 50,000 gross i sure could feel a lag of power, the turbo is a holset ht3b, but the fuel pump doesnt pump fast enough, i only build 10 psi of boost, my pyro barely hit over 800*, but the jakes work the best, that...
  13. atvcat33

    PoofStalk fall 2011

    will be there fo show, PLEASE, PLEASE, PLEASE, contact me if you need truck parts, i will bring some but not all like i did this spring. let me know if you need filters, seals, bearings, lights, etc. 414-531-9772,
  14. atvcat33

    Mystery Wheel Cylinder

    thanks for the great info
  15. atvcat33

    Racing the Deuce 2010

    havnt heard anything
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks