Recent content by avman

mine goes out on my 1123a2 when I don’t drive it for awhile. It sounds like a grounding problem.

There are also friction pads in the fan assembly. I had overheating problems and that was the cause. Replaced them and everything worked fine. They are easy to replace.

I am wanting to do a two door hmmwv In frag 5. Don’t know why, but just want to do it. Who is a source who could help on a 1152?

It would be hard to bend a bracket for the AC compressor. The alternator and power steering bracket is cast so it would on crack. I checked all my brackets and everything seems secure. The attached picture is the alternator bracket bolted to the manifold. it seem there is a washer and nut...

Thanks for the info. I will be climbing underneath today..

I have been dealing with the same with belts jumping then failing. I had my water pump and harmonic balancer crap out as well, both needed to be replaced. What I see on mine is that the power steering pump is to far forward. The AC condenser is about a half grove off. Anyone else see...

I have a few of these valves for sale.

Yes it does have a red dot. Also it looked your belt was not all the way one. Good luck

Yes, had the same problem with my 1123. Replaced 3 belts until I put on a Napa micro v 25 081102. Been on for 11000 miles with no problem.

There are pads in the fan. Everything worked fine on my hmmwv and was overheating. Replaced these pads and no more overheating issues. You will see small screws on the back of the fan. They are easy to replace. Got my new pads off of eBay a few years ago

Don't see why they will not work. You will have water leakage on the c pillar. The factory one have a flat piece of metal to support the seal.

There is plenty of info on the internet. Interesting stories of gov corruption. Not how good of a vehicle you can build but more about who you know. I would like to get one but a little expense. Also there are not a lot of parts out there

This ones puts out 22000 btu. Why would this not work like the red dot http://coldmasterinc.com/product/ac-kit-universal-under-dash-evaporator-22-220btu-450b-100hd-12v/

Had the same issue with the fan not engaging. Finally replaced the friction pad and everything works great

I am planning to install this on my m1045a2