Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I know this thread is going back quite a while. But nothing was ever posted on what solved the problem. Has anyone had this same issue? If so, what did you find the problem to be or how did you fix it?
I do not know anyone with a truck to use for the test and would prefer not to have to rent one for several hundred dollars for the test. I also assume I will still need to get this resolved to pass the semi-annual inspections.
I have an M925A2 and plan to use it for my CDL test. When building air pressure, the low air pressure warning light goes out at approximately 65 to 70 psi. When applying the brakes, to check the low air pressure warning light, the light turns on at about 53 to 55 psi on the primary pressure...
Check your grounds and connections. You might want to also check the wire harness/connection on the driver's side firewall. I have had this happen to me. While trying to track down the problem I moved this harness and the lights went back on. I tried cleaning all the connections but every now...
Here is the second one:
1990 M925A2
Obtained from Sparta, Wisconsin via GL
NSN # 2320012300308
Identification # NL0YFN2500499
Serial # 2500499
USA # NL0YFN
US Property #...
CARNAC Thank you for the service as well. Donation will be inbound! I have two. The first one is:
1984 M1009
Obtained from Private Party
VIN # 1G8ED18J4EF113493
NSN # 2320011232665
Registration #...
I would also check the wire harness under the hood where it goes through the firewall. I had a problem before on my 1009 where I lost all lights. I checked all fuses and grounds and could not find the problem. For the heck of it I happen to have the headlight switch on and started jiggling and...
I picked up an M105A2 from Sparta a few years ago that was reworked by VSE in September of 2010. Like Gunzy's it was pretty much "like new" with new NDCC tires.
Hello everyone! I am looking for assistance in picking up a tire from Ft Carson, CO and shipping it to Homer Glen, IL 60491. Any assistance you can provide would be greatly appreciated! I would of course be willing to compensate you for your time and assistance.
When I had problems with my brake lights not working, I did change the turn signal switch (had to anyway since it already had problems not locking on). After changing the turn signal switch I still had the same problem. I finally checked and replaced the turn light switch. That fixed the problem.
You mentioned that you checked the continuity of the brake light switch? I am assuming you are referring to the switch under the dash at the brake pedal? If not, then check that switch. I did have problems with my brake lights. It turned out the be the switch (only a $8.00 part) so you might...