Recent content by ca1517

I had a stuck injector on a Detroit Series 60, it did the same thing as what you are describing. I ended up filling the fuel filter with seafoam, and a again with marvel mystery oil, it finally cleared up.

So,,,, you do recoveries for free?

It was a 3126, but yes, would die, and not restart on its own.

Last time I had this problem it was the speed sensor, Cat part number 245-4630, the o rings are part number 117-1385. Good luck

The engines I have in cans are depot rebuilds, they are test run, and have the dyno sheets with them. If you were looking for one, you can contact me via pm.

I would think that something that would damage the valve would probably crack the oil pan as well. Have you ever seen one of these valves in person? They come stock on a lot of brand new Caterpillar heavy equipment, I would be inclined to believe that if they have faith in them, that I could as...

I have a very good 101a2 trailer, it is green, with a woodland tarp, like new tires. The only thing I can think that is wrong is one of the rear racks is wood, and the rest are fiberglass. I will only bring to rally if I have a commitment to purchase. Asking 900.00.

I know someone who has a trailer that sounds similar to what you are describing. It sure is handy, just needs a bigger toolbox.

I have some tactical airfield fuel filters. I believe they will do 350 GPM. They are brand new in the crates. PM if interested.

Good luck, I have the 5000.00 Pulse-Tech Pro HD, and it will not save one that far gone.

Be sure to pick up a set of keys

I would cringe to think about the climb to the deck of your flatbed, even with a beavertail addition. Tracks and rollers, just to ride and play, I would cry. A new undercarriage for my tractor is about 13,500$, and it is just a toy, kind of the same boat you will be in.

Not sure about an A3, but on tractors with the 3116, there is a manual hand pump, so when you run out fuel, you can reprime the system. When all else fails from this, I have removed the air cleaner, soaked a rag in gas, and held it in the breather housing with someone else cranking it over. The...

How many mre's, and how much?

I have 2 depot rebuilds, complete, in cans. 3200$.