Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have a MEP-002A which is not generating any power. I tried looking for someone to fix it, but I have been unsuccessful (live in PR). During all that hurricane Irma/Maria mess the generator kept us going (7 months without power sucks). I really would like to fix it because this thing is a...
Question, checking the maintenance manual it says:
Thing is I cant seem to find TB3, I see TB2 back of the AC box (Figure 6-11 on T34 manual) but looked over the manual and cant seem to find it. Can anyone tell me where it is so I can do this test.
Ok thougt my multimeter was acting weird since when not connected to anything it gave me random readings but when i tested the batteries gave me a stable 25.7v.
Tested the pin 27 and on start position on and got 25/26 v.
I had already checked that with the multimeter. No power on l1 l3 or on outlets. Gauge for hz + volt worked when generating power now says zero.
Holding the main switch in start position while running? Wont that mess up the starter like with cars?
The generator was running. I run the generatot only at night. I was sleeping when it failed but since I have one of those apnea machines I noticed immediately. It just turned off as if the breaker was turned off. The breaker was still in the on position.
I'm not an expert but I'm comfortable...
I have been using in the generator for a while (6 months without power sucks. Stupid hurricane). Anyway 2 days ago it stopped generating power. Hertz 0 voltage 0. I have one of those chinese generators and I'm using it at the moment but I dont trust it so want to try and fix the 002a.
So which...
Ok I might have explained things wrong. It does not just pops out. It starts coming out slowly with the vibration until it is out enough to starts to turn off.. It sounds as if it was running out of fuel and I push it back into place and it keeps running. So I dont think its electrical just a...
Ok, that was it. I imagined something fell off. Added a bolt and it now turns off with the switch as it should.
Now the last thing I need is a new emergency shutoff switch. The one I have sometimes pops off with the vibration and turns it off. I MacGyvered something to keep it down for now...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!